Training Example: Keycode Cork – Review the Data, Give Your Score & Compare to the Real AI Evaluation

[H1] Welcome to Keycode Cork

[H2] Services

[H2] Mobile Car Key Service
If you are in need of assistance but can’t make it to our garage, Don't worry one of our dedicated mobile car key service unit will come to you and fix the issue right there and then.

[H2] Diagnostics & Coding
Keycode provides key coding with state of the art programming and key cutting equipment with a database of information for over 5000 vehicles, Keycode  covers most makes and models worldwide.

[H2] Ghost II / immobiliser
The Ghost II is the best in the market for vehicle security it protects your car from key-cloning, hacking, and even key theft.  The Ghost has no key-fobs or LED indications to give away its location. The Ghost uses the buttons in your vehicle such as those on the steering wheel, door panels or centre console, to allow you to make a unique, changeable, disarm sequence (like a PIN code) that must first be entered before you can drive your car. Just like your credit card but you can make your car disarm sequence even safer by making it up to 20 presses long!



[H4] Locked your keys in the booth
We at KeyCode use a non destructive entry means to enter vehicles that will not damage your vehicle in any way as our tools work in the same manner as the vehicles car key. KeyCode have fully fitted mobile key-cutting and programming units on the road and can do the entire job on site saving you money on extra service calls that you would normally have paid.
KeyCode, save you time with our great mobile service

Find Out More



[H4] Keycoding done the right way
KeyCode is a division of the well known master keys group that is dedicated to car key coding and vehicle opening where car keys have been lost or locked inside the vehicle or in the boot of the vehicle.
KeyCode is your key specialist that will get your vehicle mobile fast. We use the very latest state of the art locksmith vehicle entry tools and the very best diagnostic equipment to get your vehicle back on the road in no time.

Find Out More

[H4] Car Key Programming
Beginning in the late 90’s transponder chips began to be integrated into car keys. This was done to provide additional security to the vehicle.

View Details

[H4] Remote Key Fob Replacement
It’s now possible to get an extra key fob by cloning your existing key fob or keycard. Duplicating key fobs is one of the many different services we offer.

View Details

[H4] Car Key Cutting
Here at Key Code Ireland we specifically cut keys fro almost all makes and models of car or van. The chances are if we cant cut it then it cant be done

View Details

[H4] Non Destructive Vehicle Entry
Our dedicated team are available 24 hours a day 7 days a week so if and when you need us we’re just a phone call away

View Details

[H4] Lost Key Replacement
Need A Spare Car Key for your automobile.? Let Us Clone Your Key Or Program It On Board while you wait

View Details

[H4] Broken Car Key Extraction
If your key breaks off in the ignition it’s  safe to say your day is ruined? Not when you call Key Code Ireland

View Details

[H2] A Selection of thousands of car keys & key fobs we have in stock

[H2] Get In Touch

0873434977
[H3]

[H4] Location
Togher Road  Togher Cork

[H4] Email
info@keycode.ie

[H4] Open Hours
Always Open

[H1] Send A Message

[H3] best

Home
www.bestinireland.com

[H3] GHOST II  /  IMMOBILISER

[H3]  Protection from Key Cloning and Key Theft.
Important notes: We are at the mercy or phone manufacturers and operating system providers (Apple and Android). We test as much as possible on as many devices as possible but a software update might change how the phone uses Bluetooth and interrupt the functions of the Ghost. This sometimes happens at the first release of a major iOS update and subsequently gets fixed as minor updates follow. Always use the app as a convenience feature and not the primary disarm method. Always remember your disarm sequence and ALWAYS have access to your emergency code.
[H3] Can you afford to have your car stolen?
With the shortage of semi-conductor computer chips continuing across the globe it continues to disrupt the car industry. The Russia-Ukraine war, along with the covid pandemic has seen sales and production numbers taking a substantial, global hit. At first, it seemed it was only a problem for brands of appliances and computing, but the shortage of the silicon chips has seen the automotive industry halting production in some countries, therefore fewer new vehicles are available. This has led to lengthy waiting lists at dealerships, and buyers are now looking to buy second-hand vehicles instead.
It comes as a complete shock to consumers when they are either choosing a replacement vehicle (if stolen) or if purchasing a new vehicle, when they find out the lengthy wait for a new vehicle. The best scenario would be once a vehicle has been purchased customers should look at enhancing the security of the vehicle, with an Autowatch Ghost immobiliser. Vehicles are being stolen right across the country and the rate of theft has increased. According to the P A News Agency there has been 88,915 up until March 2022. Thieves are stealing in demand vehicles for the parts and can strip one within hours. It seems there has been a 40% decrease in car vehicle production  in uk alone



[H4] APPROVED GHOST ll INSTALLER



[H4] Moblie service

Program New Car Keys
Replacement Auto Remotes Programmed
Reprogram Car Remotes
Car Key Reprogramming
Ghost ll / immobiliser

[H3] Detailed Services

GhOST II / IMMOBILISERConvenience24/7 Car Key ProgrammingCar Locksmith

Approved installer for autowatch
Immobilisation by communicating with the ECU
Disarm sequence via buttons on steering wheel / dash
No transmitted radio frequency signals
Uses the on-board CAN data network
User changeable disarm sequence
Service / Valet mode means the disarm sequence is never compromised
Secure, unique emergency code should the disarm sequence be forgotten
Mobile application can connect to 2 phones to allow quick disarm

No matter what type of vehicle you have when you need a new car key programmed you can be sure that our skilled and talented team of car key programming technicians can and will get the job done right. We offer all of our car key programming services at the lowest possible prices and always have a customer service representative standing by ready to take your call. Contact us today to learn more about the car key program services we can offer you.

Program New Car Keys
Replacement Auto Remotes Programmed
Reprogram Car Remotes
Car Key Reprogramming And Much More!

No one is able to tell when they will be thrown into a locksmith emergency, this is in part what makes them such an emergencysituation. They always seem to happen at the worst possible times when there is no one else around to lend a helping hand. That isno longer the case now that our team of expert auto locksmith car key programming technicians are on call 24 hours a day 7 daysa week. No matter what time of the day or night you need assistance we are never more than a few short minutes away from yourlocation. We arrive in our mobile service units which are loaded with all the tools and equipment needed to program your key orremote right there on the spot. We are the most trusted car locksmith in Toronto for a reason, we always answer our customerscalls, never over charge and always over deliver. This is why we are sure that no matter what type of vehicle you may ownwhen you need a new key programmed, old remote reprogrammed after you change the batteries or want to add a spare key to yourvehicle we can and will get the job done right and right away.

We are experienced and certified car locksmiths; we are very dependable and reliable and can provide quality replacement car keys for all makes and models of cars and vans. We don’t consider winning more benefit rather we are committed to serving the customers in an ethical manner. Our car locksmiths in Ireland are experienced and provide quality auto keys for all the different makes and models of car brands throughout Ireland.

[H2] Get In Touch

0873434977
[H3]

[H4] Location
Togher Road  Togher Cork

[H4] Email
keycode@outlook.ie

[H4] Open Hours
Always Open

[H1] Send A Message

[H1] Transponder key Programming

[H2] What you need to know

Beginning in the late 90’s transponder chips began to be integrated into car keys. This was done to provide additional security to the vehicle. With this chip installed in the plastic cover on the bow of the key, a message could now be sent to tell the car that this key was more legitimate. This was meant to prevent things like hot wiring and slide hammer attacks. With a transponder key, simply copying the bitting on the key blade will not give you the ability to start the vehicle. When the car has the properly shaped key inserted, it sends out an electric charge. This powers the transponder chip, which allows it to send a message to the transceiver of the car.
When the transponder is not programmed or non-existent, the transceiver of the car will not get the correct message. This message is a digital key. The car will not start without both keys. Most often, transponder key programming will go hand in hand with cutting a new car key, but this is not always the case. Keys can be cut at a different location and then brought to the locksmith for transponder programming. This will require that the key that has already been cut does have a transponder chip in the assembly. If it does not, a new key that has a transponder will need to be cut. With the programing service customers can also elect to have the existing transponder keys removed from their car’s computer, so that no keys will work except for the new ones.

[H2] FAQs
[H3] What is a transponder key?
A transponder key is a car key that has a transponder chip inside of it. This is an additional security measure meant to increase the levels of proper user verification. The chip gives off a signal that communicates with your car’s transceiver. The transceiver is looking for the correct signal, so if there is no signal or the incorrect signal, the car will not start.
A car that requires a transponder key will not work without one. A key without the proper programming will still open the car doors, and trunk, but you will need the appropriate transponder key programming in order for the car to start.
[H3] Do I need to program my transponder key?
If you want your key to work in the ignition of your car, you must program the transponder key. Transponder key programming is not necessary for every single car. Some older vehicles only use the standard metal key with no supplemental electronic components.
In the instance that you do not want a key that will start your car, and all you are looking for is one that will open your exterior locks (doors and trunk), there is no need to program a transponder chip. When you have a transceiver in your car, there is no way to get around transponder key programming without undermining your own security.
[H3] How do I know if I have a transponder key?
Take a look at your car key. There is the metal piece that you place in the ignition (blade), and a larger flattened piece that you will use to turn the key once it is inserted (bow). If the bow of the key is covered in a plastic or rubber shell, then there is a good chance that there is a transponder chip inside. To be certain that this is the case, you can remove the plastic covering and look for the chip.
It is very important that you do not scratch or damage the chip during this process because that will make the key unusable in the ignition. You could also copy the key using a key cutter and see if it will start the car. If you attempt to start the car with just a metal key, keep the working key out of the vehicle, as this may give you a false positive.
The most foolproof method is to call an auto locksmith They can check to see if the key uses a transponder chip, and complete the transponder key programming if you would like to make a new fully functional key.
[H3] Do I need to purchase a new key?
If you would like to have another key, you or your local locksmith can make this purchase. In the event that you would like to purchase the key yourself, be wary of secondhand keys. These will be near impossible to recut and are most likely already programmed. Once the transponder key programming process has taken place, that chip cannot be reprogrammed to work with another car. The key must be blank.
That means that there are no cuts made and that the transponder chip has never been used. The key must also be appropriate for the car. If the key does not have the proper shape, then it will not fit into the keyway. Whenever you want someone else to do the work, trust the company that is going to do it right. United Locksmith always has your best interests at heart. Let us help you with every step of your transponder key programming.
[H3] How long does it take for transponder key programming?
Transponder key programming only takes a few minutes. This can be done with just the keys, or at the car itself. Additional time will be added if the key in question needs to be duplicated. If there is no key to duplicate, that is no problem, as our locksmiths can cut you a brand new key from code. This only requires us to take down your VIN (Vehicle Identification Number), and then the new key can be cut.
All of these tasks do not take long, but they do add up. United Locksmith always ensures that services will be delivered in a fast and efficient manner. However, speed will not sacrifice quality. Trust the company that can do it all, and offers if all fast and for a fair price.
[H3] Does programming include a key cutting service?
Transponder key programming is a separate service from Key cutting but all of our technicians are equipped to do both. Programming a key will not do much for a key if it has not been cut. The key will need to fit into the ignition of the car in order to start the automobile.
The transponder chip is not the sole form of user identification. It must be used in conjunction with a properly cut car key. Just as a cut key will need transponder key programming to work in the ignition, the chip needs to have a key cut so that it can work in the ignition.
[H3] Can I program my transponder chip myself?
In some cases, you will be able to program your own transponder chip. Most often, this type of reprogramming will require the use of two working keys, but that will depend on the type of car you have. Transponder key programming can be tricky if you are trying to do it yourself. Each vehicle has its own process pattern and programming method.
You will need the exact information as it relates to your car if you would like to do this process yourself. From there, you will need all of the proper supplies. Rather than get frustrated by wasting time and money on methods that may not work, trust a locksmith to do it right the first time.

[H4] Transponder Key Programing Service
There is no better way to be protected than to have extra keys to the things you own. Rather than waiting to lose your keys, you should get a new one made while you still have a spare. Once you postpone until an emergency, you will be strapped for time. This is then likely to require more time, as more services will be required. Preparedness is security, so always fight to be prepared for what the world is going to throw at you.
Whenever you are in the market for a new car key, it is always important to have a company that can provide you with all the services you need. Thanks to our mobile locksmiths, there is no location that is beyond our reach. United Locksmith can get you all the help you need, and deliver it straight to your location. We have quick arrival times for emergency services and are available at your convenience, by appointment. We offer 24-hour locksmith service to make sure you are getting what you need no matter when you need it.
When our technicians arrive to assist you with your transponder key programming, they will have all of the appropriate equipment. This includes a key blank if you have not purchased one on your own. If you require a duplicate, the key will be able to be cut on site.
In the case that you would rather have the key cut by code, that can be handled prior to arrival as long as this is not an emergency call. Once the locksmith arrives, they can use an existing key or the car itself to program keys. This is done with one of our transponder key programming tools. But that is not all that these tools can do.
Transponder key programming does not just end at making sure a new key can start your car. With a professional locksmith, there are more services that transponder key programming can include. The existing keys can be erased from the system. This is monumental if you have been losing the keys or do not know the whereabouts of some of your keys.
Essentially the locksmith can make it so, the old transponder signal is not accepted by the automobile’s transceiver. Transponder key programming can double as a sort of reprogramming. This offers customers better protection than what would be delivered by simply replacing the keys that may have been lost or stolen.

[H4] In-Car Transponder Key Programing
If you would like as many options as possible for your transponder key programming, then it is best to get your car keys programmed using the vehicle. Some types of car will require the key to be programmed inside of the vehicle. This will make sense in those cases, but it also affords you additional capabilities.
In car transponder key programming, a chip can be programmed without any existing working key. Once the key is cut by code, all you need to do is turn over your automobile to a trusted locksmith, and they can find the code that your transceiver is looking for. That code can then be copied onto a blank key. And the key must be blank and un-programmed, so be aware of the danger of aftermarket keys,In case that you would like to have all of the existing keys to the vehicle erased, that can also be done at this time.
All the technician will do is access your car’s onboard diagnostic port. Once this port has been exposed, our tools can be used to access the vehicle’s computer. These types of processes can take a while because the systems on our machines are built with waiting periods. These are sometimes referred to as authentication periods.
These waiting periods in the programing process means that the machine imposes a longer wait time. This prevents the quick usage of the device for illegal means. There is no need to worry, though, because although our machines behave slowly at first, or technicians make up for the wait time with fast service.
Some car keys can be programmed using an existing key without involving the car at all. This is not the case for all keys and all cars. In some cases, even if a transponder key programming is done at a separate location than the vehicle, there is still some amount of mechanical key manipulation that will need to be done inside the automobile.
Your locksmith can inform you on any type of secondary procedure. The locksmith can also do this process if that is more convenient for the customer. If you can use this service, your locksmith will tell you. In the event that the car is needed for all of the transponder key programming, they will help you with that process as well.

[H2] Get In Touch

0873434977
[H3]

[H4] Location
Togher Road  Togher Cork

[H4] Email
keycode@outlook.ie

[H4] Open Hours
Always Open

[H1] Send A Message

[H1] Non Destructive Vehicle Entry
[H4]

[H2] What you need to know

Getting locked out of your car can be a very stressful experience, but it is always important to stay calm as improper methods of opening your vehicle may harm it. There is a vast tool kit that auto locksmiths use to open a car that have the keys locked inside the car, broken in a lock, or simply lost. The slim jim is perhaps the most commonly thought of tool for opening a locked vehicle but is only effective on cars with upright style locks. The Slim Jim method varies depending on the make and model of the car but is predicated around the idea of slipping the tool between the weatherstrip and moving it until the upright lock is moved. Once the tool has found the locking device, the Slim Jim must hook the lock and be slid up to unlock the car. This process requires a lot of finesse as this part of the door has many wires and electronic mechanisms that can be disrupted, harming the car if done unprofessionally.
A more common practice in car lockouts is the use of wedges. Wedges vary in size and shape to accomplish success with a vast number of different makes and models. Though some wedges may seem more refined than others they are used because of their proven track records and will not harm the vehicle. The wedge serves as a way to create an opening in the door so another tool may be used to unlock the car from the inside. Once the wedge is in place a Lasso Tool may be used for an upright door lock. This tool grasps the lock with a small lasso so that the lock can be pulled upwards to unlock the car door. A rod may be used for push or slide buttons if the car does not have upright locks.
More specialized tools act in a similar fashion to the Slim Jim, in terms of a wedge free entry. The Japanese Tool (named for its use predominantly on Japanese manufactured cars) is dropped down between the weather strip and the windowpane and comes up on the other side of the glass to manipulate thumb style locks. The Auto Buster (perfect for GM cars) enters the car just like the Japanese tool, but due to its shape can more adeptly press sidelocks or use side sliding locks.

[H2] FAQs
[H3] How fast will the car locksmith arrive?
When you need an car lockout service, you need it now. Our mobile locksmith can be at your location in 15 to 30 minutes. This depends on a few external factors such as, how busy our technicians are with other customers at the time, the technician’s location in relation to you, how remote a location you are in, etc. There is no need to worry though, because we will be there to help no matter what. You can be sure that our technicians will arrive as soon as they can, and inform you of their estimated time of arrival before you fully commit to the service.
[H3] How long will it take to unlock car door?
A traditional car lockout takes approximately 5 minutes to remedy. After that, you will be back in your car and on your way to fun and excitement. If your car has more complex security than a standard vehicle, then the time needed to gain entry will adjust relative to the difficulty of the job. However, there is no need to worry, because our locksmiths will get you in as quick as possible without harming your vehicle.
[H3] Will it damage the vehicle to unlock car door?
No. Painstaking effort is made on the part of United Locksmith to assure that no car lockout results in unnecessary damage. There are very rare circumstances with some cars where a deadlock feature combined with keys that have been left in the trunk, may require some drilling. However, that hole will be covered by your reinstalled license plate, in the rare instance that you need that very particular service. We understand that your car is precious, and that is why we do our utmost to ensure that all automobiles under our care are protected from harm.

[H3] Is it ever impossible to unlock car door?
If it is, United Locksmith has yet a case where they could not unlock car door. There is no such thing as perfect security. It is impossible to make anything completely secure, which is good news for you. It means that an unlock car door is possible no matter what. This does not mean that you have bad security. In fact, if it takes a professional locksmith a while to open, then that means that most criminals would be turned away. Don’t think of it that your car is imperfect. Think of it as, United Locksmith being amazingly talented.
[H2] Unlock Car Door
Can’t unlock car door? No problem. Here at United Locksmith, we have specialized technicians with the skill and experience to get you back into your locked car no matter what the circumstances are. With our expert technicians, there is no car lockout that cannot be solved. We have the tools, resources, and professionally trained workers required to open any locked car. There are many ways they can approach a car lockout.
Each technician learns the science needed to quickly unlock car door. From there they work on the art. With all aspects of locksmithing, there is craft required. Beyond the know how there is a need for the locksmith to feel and finesse the locks. Perhaps it is a love of the industry that causes me to give this type of praise and interpretation to locksmithing, but there is certainly a case to be made for the beauty of security. It is only right that beauty should need something as beautiful to be its undoing. And there is no one better than undoing beautiful security than United Locksmith.
[H2] Tools
Locksmiths need their tools in order to unlock your door.  The usage of one tool over another is left to the discretion of the locksmith. Because of the artistry that locksmithing requires the individual insight of a particular locksmith, a lot must be left up to that individual. Beyond the technician’s preference, there are certain tools that lend themselves to a situation.
A good locksmith will know what tool to use and when a tool is not appropriate for the job. A modification on a car may also prevent a standard type of entry tool. This decision centers on the situation and the intuition of the very locksmith that will have to perform the service. Some of the tools they may use include:
Wedges – A wedge is used to create a gap between the frame of the car door and the very door itself. These wedges can fluctuate depending on the discretion of auto locksmith. These variations include, but are not limited to, wooden wedges, plastic wedges, rubber wedges, and air wedges. Wooden and plastic wedges are likely to be hard, so it is important to lay down some sort of towel or rag as a buffer between the car and the tool.
This will keep the paint from getting scratched, and protect the weather stripping and plastic coating around the window glass. Softer rubber wedges are relatively uncommon, but there are locksmiths that feel very comfortable with them. This material will not scratch or damage the car as it slides between door frame. The most common professional wedge is the air wedge. This is a cloth pouch that has a small rubber bladder attached to it by a length of tubing. The wedge is inserted while flat, into the door jam. Then the bladder is pumped so that the pouch expands.
No matter what type of wedge is used, it must not be left in the gap for too long. A gap that is maintained for an extended amount of time can cause lasting harm to the door. That is why our locksmiths handle a car lockout quickly and efficiently. In the same vein as the time precaution, a gap can be made too wide, which might break the glass or just damage the door.
All of these issues with wedges are reasons that you should leave a car lockout up to professional locksmiths. This method also requires a probe tool to be inserted through the gap. Simply opening the door slightly will not be enough to open it. The end goal of this entry method is to manipulate the interior door locks in some fashion.
Probes – Once a wedge has been installed successfully into the doorway, it is time to use the probe. A probe is a thin and long tool that is used to manipulate the interior door locks. It must be inserted from the outside of the car, so the material needs to be sturdy and thin. The professional probe tools have a balance of strength, which is necessary to manipulate the interior door locks, and malleability, which is needed to better reach the different types of locks.
Probing a doorway can take a bit of time, especially if the lock buttons are inopportunely placed. For this reason, it is not always better to use a probe, even though it may seem like the best way. A trained locksmith will know if a probe is the right choice for your car lockout.

Specialized Closed Doorway Tools – Other than the variety of slim jims that exist, there are other types of closed doorway entry tools. The defining characteristic of these tools is that they do not rely on opening the door to any degree. They are not considered to be a probe. Secondly, they are not a slim jim, because they do not open the lock while inside the door. These tools are placed between the weather strip and the window glass, go into the door, but then resurface on the inside of the car.
After the resurfacing, these tools will manipulate the door lock buttons on the car’s interior. The reason that these tools must be specialized is because there must be pre-existing bends. The shape allows the tool to enter the door while closed, resurface and then have the proper shape to still use the locks on the other side. All of this requires precise measurements and angles for every length and bend. The trick with these tools is knowing which works for what type of car. Other than that they are relatively intuitive to use, but problems can occur from misuse.

[H2] Get In Touch

0873434977
[H3]

[H4] Location
Togher Road  Togher Cork

[H4] Email
keycode@outlook.ie

[H4] Open Hours
Always Open

[H1] Send A Message

[H1] About Us

[H3] Providing Expert Service.

KeyCode Cork is a local locksmith service with technicians located across the Ireland. Keycode cork delivers fast and efficient locksmith services 24 hours a day, 7 days a week. Our local locksmiths are available 24 hours in specific service areas in the Munster. KeyCode technicians have an average arrival time ranging from 30 minutes to an hour. KeyCode Services staff consists of licensed and bonded locksmiths, exclusively. Our expert team of emergency locksmith professionals are trained & experienced in using the latest equipment and locksmith methods.

[H2] Fully Registered Trusted Company

[H2] Customer Satisfaction Guaranteed

[H2] Car key specialists, covering all of the transponder key market.

[H2] Only the best service will do.

KeyCode Cork has been serving the recovery industry for nearly 10 years. Our software integration and dedicated staff make using Keycode  cork the fastest, most efficient and professional way to order your car keys. We’ve worked tirelessly, earning business from locksmiths and repossession companies alike. The predictable pricing of our Auto Lock Solutions can be tailored to fit your specific needs.

We are available every day of the week to help you in your hour of need, our prices are the best you will find and stay the same day or night, Our commitment to you is to provide the highest quality efficient service in the most cost-effective way we know how. Call KeyCode Cork for a car key quote! Genuine keys, smart keyless keys, remote keys, transponder keys – We can help!

We offer the fastest response times and give you great prices for All  car keys We’re your “one-stop-shop” for replacement keys, remotes, remote cases, and other key accessories. We have the guaranteed best selection and guaranteed lowest prices.

[H2] Happy Customers

I realised one evening that I couldn’t get into my car and would be stuck in the cold or need to get a cab home, I called up key code and within 20 minutes I was back on my journey, I can’t recommend them enough.

[H4] Finbarr Murphy

No more waiting around wondering how long it will take to get a new car key or when your automobile be back on the road one phone call is all it took and Keycode cork took care of everything.

[H4] Jennifer Lee

[H2] Get In Touch

0873434977
[H3]

[H4] Location
Togher Road  Togher Cork

[H4] Email
info@keycode.ie

[H4] Open Hours
Always Open

[H1] Send A Message

[H1] Request Callback

KeyCode Ireland are trained and qualified to work with almost all mainstream Irish & UK sold automobiles. With a broad wealth of knowledge and the equipment to match; KeyCode are the perfect solution.  In our time in business, we have worked with the below manufacturers.
Book An Appointment



[H3] 0873434977

[H2] Vehicles worked with

^

[H4] Alfo Romeo

[H6]

^

[H4] BMW

^

[H4] CHRYSLER

^

[H4] DAEWOO

^

[H4] honda

^

[H4] HYUNDAI

^

[H4] IVECO

^

[H4] jeep

^

[H4] LAND ROVER

^

[H4] MERCEDES BENZ

^

[H4] MITSUBISHI

^

[H4] nissan

^

[H4] ROVER & MG

^

[H4] seat

^

[H4] nissan

^

[H4] toyota

^

[H4] VAUXHALL

^

[H4] smart

^

[H4] Audi

[H6]

^

[H4] CHEVROLET

^

[H4] CITREON

^

[H4] Fiat

^

[H4] ford

^

[H4] ISUZU

^

[H4] Jaguar

^

[H4] kia

^

[H4] Lexus

^

[H4] mazda

^

[H4] Lexus

^

[H4] PEUGEOT

^

[H4] RENAULT

^

[H4] saab

^

[H4] skoda

^

[H4] SUBARU

^

[H4] VOLKSWAGEN

^

[H4] volvo

[H2] Frequently Asked Questions

Customers of Key Code Ireland have every right to ask any question they may have before undergoing our service but to help you along we have listed some of the most frequently asked questions below.

[H4] Will my car be damaged?
No!  The services that Key Code Ireland provide uses quality and care to assure that your vehicle is unharmed during the necessary processes. Our trained professionals will assure a smooth auto lockout or key repair process.

[H4] How long will it take you to complete the job?

Every job is different and presents it’s own set of challenges, so it’s impossible to give an exact completion time. We aim to complete jobs within two hours.
[H3]

[H4] Can I get a new key without the original

Yes! It depends on the type of key you had, but you can have a new car key made.
[H3]

[H4] Who can I contact for Car Keys
You can call our live customer care centre at 0858495070 or submit an enquiry through our contact page. We’d love to hear from you.

[H4] I’ve locked my keys in the car, will you be able to get them out?
Yes. We are trained in the art of lock picking and will be able to get you your keys in no time at all. This method is 100% damage-free.

[H4] Do I need my car towed if I lose my car keys
Usually not! We can help replace your car keys and have a mobile unit to come to your assistance and if the job can be done on the roadside we will do it there and then.

[H2] Get In Touch

0873434977
[H3]

[H4] Location
Togher Road  Togher Cork

[H4] Email
info@keycode.ie

[H4] Open Hours
Always Open

[H1] Send A Message