Training Example: fittydent – Review the Data, Give Your Score & Compare to the Real AI Evaluation

HomeLisa Maria Glatzl2026-04-14T10:43:49+02:00
[H1] A smile like before.
[H1] A smile like before.
[H1] A smile like before.
Our Philosophy
A denture is part of life’s journey. What matters to us is how it feels in everyday life.
Since 1982, we have been developing products with a clear commitment:
to noticeably improve quality of life.
Our actions are guided by experience, responsibility and long-term thinking. For us, quality is not an option – it is a prerequisite.
Let’s start with the most important question:
[H2] What is troubling you?
[H3] upper denture
[H3] lower denture
[H3] partial denture
[H3] lower denture
[H3] cleansing
Sorry, your browser doesn't support embedded videos.
[H2] “We improve quality of life.”
That is our commitment.
For every denture wearer.
And it is more than a promise.
It is the result of continuous research, carefully selected ingredients, and decades of experience.
Millions of people worldwide trust Fittydent.
Because quality can be felt.
And reliability matters.
A denture is part of life’s journey.
What truly matters is how it feels every day.
Stability.
Security.
Confidence.
Learn more >>
[H2] “We improve quality of life.”
That is our commitment.
For every denture wearer.
And it is more than a promise.
It is the result of continuous research, carefully selected ingredients, and decades of experience.
Millions of people worldwide trust Fittydent.
Because quality can be felt.
And reliability matters.
A denture is part of life’s journey.
What truly matters is how it feels every day.
Stability.
Security.
Confidence.
Learn more >>
[H2] Most frequently asked question
What is the meaning of waterproof?Lisa Maria Glatzl2024-04-23T13:05:36+02:00
[H4] What is the meaning of waterproof?
fittydent Denture Adhesive and fittydent Denture Adhesive Cushions consists of two main components: Polyvinylacetate (PVA) and Carboxymethylcellulose (CMC). Polyvinylacetate is the adhesive. It works only on a dry surface to create the bonding effect (like chewing gum). To keep the mucosa dry, we use Carboxymethylcellulose (CMC) which works like a “sponge” to absorb moisture in the mouth. When the “sponge” is saturated with moisture, the mucosa becomes wet, Polyvinylacetate loses bonding effect and the denture stays in place only by suction. Now you can easily remove the dentures.
Can I use the Cushions on uppers too?Lisa Maria Glatzl2024-04-23T13:06:32+02:00
[H4] Can I use the Cushions on uppers too?
We do not recommend. Due to the bigger surface, it can be that the dentures stays for 2 days or more. If food trappings get underneath, it can cause inflammations.
After I take them out, how do I remove this residues?Lisa Maria Glatzl2024-04-23T13:08:17+02:00
[H4] After I take them out, how do I remove this residues?
Cleansing Tablets
Must the dentures soak overnight?Katharina Heinz2024-04-23T13:13:07+02:00
[H4] Must the dentures soak overnight?
No. After the cleansing is done you can store it in a Denture Box.
The tube opening is too wide. Can you make it smaller?Lisa Maria Glatzl2024-04-25T09:15:52+02:00
[H4] The tube opening is too wide. Can you make it smaller?
We did a survey with a smaller opening but due to the consistence of the Adhesive for elderly customers it was not easy to squezze the Adhesive out. But if you can not figure out how to apply the Adhesive properly you can use a wet finger to spread it on the surface.
All questions >>Sorry, your browser doesn't support embedded videos.
[IMG: Weltkugel mit grauen Kontinenten]
[H2] Find our partners
Worldwide.
Fittydent works with a carefully selected international network of partners.
Together, we stand for quality, reliability and personal support.
This close collaboration allows us to combine the highest product standards with service that remains close to people.
Wherever you are – you are in good hands.
All partners >>
[H2] Contact us
We are here for you.
If you have questions about our products or their application, our team will be happy to assist you personally and professionally. Every inquiry is treated with care. With experience. With a clear focus on providing reliable answers.
We look forward to hearing from you.

Super Denture AdhesiveLisa Maria Glatzl2026-04-15T08:45:53+02:00
We improve quality of life!We improve quality of life!
[IMG: Verpackung der wasserunlöslichen Fittydent Haftcreme]
The world’s only water-insoluble denture adhesive cream.
[H1] Super denture Adhesive
Fittydent Super Adhesive Cream is the world’s only water-insoluble denture adhesive cream.
It is not washed away while eating or drinking. This creates a long-lasting, stable bond between denture and gum.
For improved fit.
For reliable hold throughout the day.
Secure. Consistent. Dependable.
[H3] upper denture
[H3] lower denture
[H3] partial denture
The world’s only water-insoluble denture adhesive cream.
[H1] Super denture Adhesive
[IMG: Verpackung der wasserunlöslichen Fittydent Haftcreme]
Fittydent Super Adhesive Cream is the world’s only water-insoluble denture adhesive cream.
It is not washed away while eating or drinking. This creates a long-lasting, stable bond between denture and gum.
For improved fit.
For reliable hold throughout the day.
Secure. Consistent. Dependable.
[H3] upper denture
[H3] lower denture
[H3] partial denture
[H4] Brand Names
[IMG: Logo Fittydent]
[IMG: Logo Fittydent]
[IMG: Logo Fittydent]
[H4] Available
International
Nordic Countries/Italy
USA / GB
[H4] Manufacturer
Fittydent International, Vienna – Austria
[H4] Suitable for
Upper, lower and partial Dentures With sensitive gums, we recommend our Denture Adhesive Sensitive.
[H4] Benefits
Waterproof, free of zinc, free of gluten, vegan, no animal testing – PETA certified
[H4] Bonding Duration
Up to 12 hours
Application Amount
Less is more.
A small amount of Fittydent Adhesive Cream is sufficient to achieve reliable hold. Using a minimal quantity ensures optimal stability. If you are unsure about the correct dosage, you may gently spread the cream in a thin, even layer with a slightly moistened finger when starting out.Milky residues on the denture are usually a sign of excessive application or insufficient cleaning. In this case, reduce the amount used and clean your denture thoroughly and regularly for hygienic reasons.Precise application.
Clean handling.
Reliable hold.
[H4] Side effects
None known.
Do not use in case of intolerance or hypersensitivity to any of the ingredients.
Do not use on diseased or injured oral mucosa.
Accidental swallowing of the adhesive cream is harmless.In the unlikely event that a serious issue occurs after use, please consult a physician. Any serious incidents related to the product must be reported to the manufacturer and the competent authority.
Extension or Reduction of Holding Time
The duration of adhesion may vary depending on individual factors.
A drier oral mucosa can enhance adhesive performance and may result in longer holding time. Excessive saliva flow, on the other hand, may reduce adhesive performance and shorten the duration of hold.
In cases of a very flat or narrow lower jaw, we recommend using Fittydent Adhesive Pads. They provide a targeted alternative when adhesive cream alone is not sufficient.
[H4] Removal
The adhesive strength decreases over the course of the day, allowing the denture to be removed easily in the evening.
Removal in Exceptional Situations
If early removal is necessary, release the denture with a gentle, controlled movement:
Upper denture: tilt slightly downward at the back and carefully remove.
Lower denture: tilt slightly upward at the back and carefully remove.
If the adhesive hold is still very strong and tilting is not immediately possible, rinse your mouth with warm water or gargle gently. The warmth helps the adhesive release more quickly.
This also applies if the adhesive strength has not decreased by the end of the day and you wish to remove the denture before going to sleep. For the next application, use a smaller amount of adhesive cream.
[H4] Cleaning
To remove possible residues of the water-insoluble Fittydent Adhesive Cream, we recommend using Fittydent Cleaning Tablets together with a soft denture or toothbrush.
Milky deposits on the denture may indicate that a slightly larger amount of adhesive was used or that cleaning residues remain. If necessary, reduce the amount applied and clean your denture regularly and thoroughly for hygienic reasons.
Minimal residues on the denture, jaw or palate can also be gently removed with a small amount of cooking oil and a soft cotton cloth.
[H4] Caution
Do not use Fittydent Adhesive Cream in combination with other adhesive products. Not suitable for soft-lined dentures. Have the fit of your denture checked regularly by a dental professional. Keep out of reach of children. The tube opening is technically designed. Dispose of the outer packaging, product packaging and leaflet in accordance with local regulations and the recycling symbols.
[H4] Storage
Store dry at room temperature!
[H4] Instruction for Use
Apply the adhesive cream in thin strips (see illustration) to the clean and dry contact surfaces of the denture.
Less is more.
A small amount is sufficient to achieve reliable adhesive strength. If you are unsure about the correct dosage, you may spread the cream in a very thin layer with a slightly moistened finger when starting out. Applying the cream to a completely dry denture makes handling easier.
Insert the denture onto the jaw and/or palate, press firmly into place and bite down briefly and firmly. Avoid eating or drinking for approximately 15 minutes.
Close the tube carefully after use.
[IMG: Logo Fittydent]
Mild Burning Sensation
In rare cases – particularly with sensitive gums – a brief, mild burning sensation may occur. In this case, we recommend waiting approximately 30 seconds after application before inserting the denture. This allows the formulation to settle briefly and the alcohol content to evaporate.
[H4] Ingredients
Polyvinylacetate, Sodium Carboxymethylcellulose, Alcohol, Triacetin, Paraffinum Liquidum, Silica
[H4] Brand Name
[IMG: Logo Fittydent]
International
[IMG: Logo Pro Fast]
Nordic Countries/Italy
[IMG: Logo Secure]
USA / GB
[H4] Manufacturer
Fittydent International, Vienna – Austria
[H4] Suitable for
Upper, lower and partial Dentures
With sensitive gums, we recommend our Denture Adhesive Sensitive.
[H4] Benefits
Waterproof, free of zinc, free of gluten, vegan, No animal testing – PETA certified
[H4] Bonding Duration
Up to 12 hours
[H4] Application Amount
Less is more.
A small amount of Fittydent Adhesive Cream is sufficient to achieve reliable hold.
Using a minimal quantity ensures optimal stability. If you are unsure about the correct dosage, you may gently spread the cream in a thin, even layer with a slightly moistened finger when starting out.
Milky residues on the denture are usually a sign of excessive application or insufficient cleaning.
In this case, reduce the amount used and clean your denture thoroughly and regularly for hygienic reasons.
Precise application.
Clean handling.
Reliable hold.
[H4] Side effects
None known.
Do not use in case of intolerance or hypersensitivity to any of the ingredients.
Do not use on diseased or injured oral mucosa.
Accidental swallowing of the adhesive cream is harmless.
In the unlikely event that a serious issue occurs after use, please consult a physician. Any serious incidents related to the product must be reported to the manufacturer and the competent authority.
[H4] Extension or Reduction of Holding Time
The duration of adhesion may vary depending on individual factors.
A drier oral mucosa can enhance adhesive performance and may result in longer holding time.
Excessive saliva flow, on the other hand, may reduce adhesive performance and shorten the duration of hold.
In cases of a very flat or narrow lower jaw, we recommend using Fittydent Adhesive Pads.
They provide a targeted alternative when adhesive cream alone is not sufficient.
[H4] Removal
The adhesive strength decreases over the course of the day, allowing the denture to be removed easily in the evening.
[H4] Removal in Exceptional Situations
If early removal is necessary, release the denture with a gentle, controlled movement:
Upper denture: tilt slightly downward at the back and carefully remove.
Lower denture: tilt slightly upward at the back and carefully remove.
If the adhesive hold is still very strong and tilting is not immediately possible, rinse your mouth with warm water or gargle gently. The warmth helps the adhesive release more quickly.
This also applies if the adhesive strength has not decreased by the end of the day and you wish to remove the denture before going to sleep. For the next application, use a smaller amount of adhesive cream.
[H4] Cleaning
To remove possible residues of the water-insoluble Fittydent Adhesive Cream, we recommend using Fittydent Cleaning Tablets together with a soft denture or toothbrush.
Milky deposits on the denture may indicate that a slightly larger amount of adhesive was used or that cleaning residues remain. If necessary, reduce the amount applied and clean your denture regularly and thoroughly for hygienic reasons.
Minimal residues on the denture, jaw or palate can also be gently removed with a small amount of cooking oil and a soft cotton cloth.
[H4] Caution
Do not use Fittydent Adhesive Cream in combination with other adhesive products. Not suitable for soft-lined dentures. Have the fit of your denture checked regularly by a dental professional. Keep out of reach of children. The tube opening is technically designed. Dispose of the outer packaging, product packaging and leaflet in accordance with local regulations and the recycling symbols.
[H4] Storage
Store dry at room temperature!
[H4] Instruction for Use
Apply the adhesive cream in thin strips (see illustration) to the clean and dry contact surfaces of the denture.
Less is more.
A small amount is sufficient to achieve reliable adhesive strength. If you are unsure about the correct dosage, you may spread the cream in a very thin layer with a slightly moistened finger when starting out. Applying the cream to a completely dry denture makes handling easier.
Insert the denture onto the jaw and/or palate, press firmly into place and bite down briefly and firmly.
Avoid eating or drinking for approximately 15 minutes.
Close the tube carefully after use.
[IMG: Icons are used to describe how to clean the prosthesis and how to use it.]
[H4] Mild Burning Sensation
In rare cases – particularly with sensitive gums – a brief, mild burning sensation may occur. In this case, we recommend waiting approximately 30 seconds after application before inserting the denture. This allows the formulation to settle briefly and the alcohol content to evaporate.
[H4] Ingredients
Polyvinylacetate, Sodium Carboxymethylcellulose, Alcohol, Triacetin, Paraffinum Liquidum, Silica
[H2] What else is troubling you?
[IMG: Icon lower Denture X Treme]
[H3] lower denture
[IMG: Icon Cleansing Tablets]
[H3] cleansing
[IMG: Icon lower Denture X Treme]
[H3] lower denture
[IMG: Icon Cleansing Tablets]
[H3] cleansing

PhilosophyLisa Maria Glatzl2026-03-12T14:50:14+01:00
At Fittydent, people are at the center. Our products are developed through experience, responsibility and the commitment to noticeably improve quality of life – every day, for every individual.
– CEO Fittydent InternationalAt Fittydent, people are at the center. Our products are developed through experience, responsibility and the commitment to noticeably improve quality of life – every day, for every individual.
– CEO Fittydent InternationalAt Fittydent, people are at the center. Our products are developed through experience, responsibility and the commitment to noticeably improve quality of life – every day, for every individual.
– CEO Fittydent InternationalGet to know our philosophy
[H2] Philosophy
A denture is part of life’s journey. What matters to us is how it feels in everyday life.
Since 1982, we have been developing products with a clear commitment: to noticeably improve quality of life.
Our actions are guided by experience, responsibility and long-term thinking. For us, quality is not an option – it is a prerequisite.
Our mission statement provides orientation. It brings together our values and guides our daily actions – in development, in communication and in every decision. It is future-oriented. And it is regularly reviewed and further developed.
knowledge and quality
[H2] Our Expertise
Our core competence lies in the development, manufacturing and distribution of adhesive and cleaning products for dentures.
We work with high-quality raw materials and consistently develop our products in line with our customers’ requirements. Functionality, reliability and consistent performance are at the center of our work.
Quality is our highest priority. Our products comply at all times with applicable legal requirements.
Fittydent International GmbH meets the requirements of ISO 13485 and is subject to the EU Medical Device Regulation (EU) 2017/745. Compliance with regulatory obligations, as well as the continuous development of our quality management system, is an integral part of our corporate governance.
Tradition and future orientation
[H2] Our company
Since 1982, we have pursued a clear goal: to sustainably improve the quality of life of denture wearers.
Today, Fittydent International GmbH is an internationally active manufacturer of high-quality denture products with a global reach.
Our Vienna head office houses the executive management as well as all central departments for export, design and marketing.
With a steadily growing presence in international markets, we place particular emphasis on reliable, long-term partnerships with our distribution partners and customers.
Our internal and external communication is characterized by clarity, professionalism and the commitment to respond promptly and personally to different requirements.
appreciation and transparency
[H2] Our Communication and Leadership Approach
Our communication is characterized by openness and clarity. We treat one another – internally and externally – with respect, professionalism and appreciation. Transparency and a reliable flow of information are self-evident to us.
We understand leadership as responsibility. As guidance. And as teamwork.
Personal commitment and the willingness to take responsibility are core values of our company.
Our leadership behavior is based on:
Clarity.
Transparency.
Respect.
Appreciation.
Integrity.
Core competency and personal development
[H2] Our Employees
Our employees are professionally qualified and committed. We support their development and create opportunities for personal growth within the company. We value individuality and personal strengths. Each person is regarded as an individual with responsibilities and personal circumstances.
A constructive and respectful approach to feedback is self-evident to us. Regular information and transparency regarding company developments are part of our internal culture.
Equal opportunities and mutual respect form the foundation of our collaboration.
Competence orientation and sustainability
[H2] Our Economic Responsibility
As an internationally active company, we invest responsibly and strategically.
Our investments serve long-term success –
by strengthening our core competencies, developing our employees and sustainably expanding the Fittydent brand.
In this way, we secure quality, competitiveness and jobs in the long term.
fairness and openness
[H2] Our Suppliers
Our suppliers are an essential part of our value creation.
We maintain long-term, reliable partnerships and treat our suppliers fairly and transparently.
Mutual trust, reliability and openness form the foundation of our cooperation.
Development and opportunity
[H2] Our Future
We see ourselves as an agile company. We do not view change as a burden, but as a responsibility. We actively shape regulatory requirements, technological developments and social change. We use the opportunities offered by technology and digitalization in a targeted and responsible manner. We continuously develop our processes – in a structured, efficient and future-oriented way.
The requirements of our partners are also our requirements. This applies in particular to the Medical Device Regulation, international registrations and new communication channels.
Flat, transparent structures create space for personal responsibility and entrepreneurial thinking.
Innovation develops step by step – through expertise, openness and consistent advancement. We define clear goals, review them regularly and communicate them transparently. For us, growth means efficiency, sustainability and long-term stability.
Our future is not a state. It is an ongoing process.

PartnerLisa Maria Glatzl2026-03-12T15:02:14+01:00
You are in good hands.
Connected worldwide through trust.You are in good hands.
Connected worldwide through trust.Where you can find us
[H2] Partner